top of page

How in the heck do I correct the camber and toe on my machine? Toe adjustment is needed to align your tires and doing it correctly involves a thorough examination. Adding new arms, replacing a ball joint or even swamping out a bent tie rod can cause you to inspect your toe. If you’ve ever seen a buddy’s steering wheel pointed over at you, it probably means his toe is way off. This kit was developed to correct this common problem on ATVs and UTVs. The degrees of the angle will vary based on what you are using your machine for, but our kit is engineered for complete accuracy and ease of use during the tuning process.

Toe Measurement: Do it the right way! Instead, of crudely leaning against the tire like other brands, High Lifter plates bolt on and measure from the hub, enabling more accurate measurements.  Alignment plates are made from sturdy steel and they are powder coated to give it a durable and easy clean finish.

Camber Measurement: Camber measurement is easy using the magnetic, digital angle finder.   The gauge is accurate to 0.1 degrees and can be calibrated for non-level surfaces in seconds. It has a large LCD for easy reading. This tool produces a more accurate result than cheap bubble levels.  The angle finder comes with a complete set of instructions, detailing the features and how to use them. 

Easy to Use:

  • Easy to use – bolt plates to the hubs on each side, front or rear.
  • Measure TOE directly using the 2 tape measures included in the kit.
  • Measure CAMBER using the magnetic, digital angle finder that is provided in the kit.


  • Aligning a vehicle after replacing suspension components (tie rods, control arms, etc.)
  • Making camber/toe alignment changes in your garage or on the trail
  • Adjusting alignment to your desired specifications
  • Prevents uneven wear pattern on tires
  • Correct offset steering wheel
  • Correct steering pull while driving


Fitment:  The plates provided are designed to fit most UTV hub bolt patterns.  (4/156 & 4/137 patterns up to 12mm stud size).  Simply attach the plates the hub and secure them with the lug nuts.  See chart for bolt patterns and stud sizes to ensure this kit will work for your application.

Bolt Pattern & Stud Size/Thread Pitch

4/137 (10mmx1.25)

4/137 (12mmx1.25)

4/137 (12mmx1.5)

4/156 (3/8-24)

4/156 (10mmx1.25)

4/156 (12mmx1.5)

4/156 (12mmx1.25)

The plate is designed to fit multiple hub/bolt patterns. Poor wheel alignment is bad for your tires and can take the fun out of driving! If your alignment is off, it accelerates the speed at which your tires wear along with ball joints, bushings, tie rods and steering racks causing you to need new parts. It can also cause steering pull. These plates are the quickest and simplest way to check camber and toe. Just mount them to the hubs to quickly and accurately measure and make changes to camber and toe.

Note: This item is non-refundable.

High Lifter Alignment Kit - Can-Am Outlander 400-450-500

  • Can-Am Outlander 400 2011-2014
    Can-Am Outlander 400 XT 2011-2014
    Can-Am Outlander 400 MAX 2006-2014
    Can-Am Outlander 400 MAX XT 2006-2014
    Can-Am Outlander 450 2016-2023
    Can-Am Outlander 450 DPS 2016-2023
    Can-Am Outlander 450 XT 2022

    Can-Am Outlander 450 PRO 2017
    Can-Am Outlander 450 Mossy Oak Hunting 2019-2023

    Can-Am Outlander 450 6x6 2020-2022

    Can-Am Outlander 450 MAX 2016-2023
    Can-Am Outlander 450 MAX DPS 2016-2024
    Can-Am Outlander 450 MAX 6x6 2020
    Can-Am Outlander L 450 STD 2015
    Can-Am Outlander L 450 DPS 2015
    Can-Am Outlander L 450 MAX 2015
    Can-Am Outlander L 450 MAX DPS 2015
    Can-Am Outlander 450 MAX DPS 6x6 2019
    Can-Am Outlander 500 2x4 2024
    Can-Am Outlander 500 4x4 2024
    Can-Am Outlander 500 2007-2014
    Can-Am Outlander 500 DPS 2013-2024
    Can-Am Outlander 500 XT 2007-2015
    Can-Am Outlander 500 XTP 2010

    Can-Am Outlander 500 MAX 2008-2013
    Can-Am Outlander 500 MAX DPS 2013-2024

    Can-Am Outlander 500 MAX XT 2007-2014
    Can-Am Outlander 500 MAX XTP 2010

    Can-Am Outlander 500 MAX LTD 2010
    Can-Am Outlander L 500 2015
    Can-Am Outlander L 500 DPS 2015
    Can-Am Outlander L 500 MAX 2015
    Can-Am Outlander L 500 MAX DPS 2015

    Can-Am Outlander 500 PRO 2024
    Can-Am Outlander 500 PRO Hunting EDN 2024
    Can-Am Outlander 500 PRO XU 2024

  • All High Lifter Ailgnment products are warranty directly by High Lifter. Customize Your ATV is not responsible for any manufacturer issues or defects. All warranty Claims must be made directly through High Lifter. 

bottom of page